Changshu Sysen glass products Co. Ltd.
Changshu Sysen glass products Co. Ltd.
Add to Cart
22"*36"
Iron mosaic Glass
Advantages:
Good sealant and double sealed which keep glass in good condition in hot weather
Small joint dot and 7 times bevelled which makes the glass so elegant !
Fill with Argon based on buyer's requirements
Reducing the noise,Keeping constant temperature
| Item | iron entrance door |
| Material | wrought iron |
| Surface Finish | polished, stained |
| Design | customization is available |
| Glass | tempered glass,frosted glass etc,single or double side |
| Opening Direction | left or right, inward or outward |
| Accessories | special security lock, handle,latch, viewer if necessary |
| Dimension | customized size is welcomed |
| Open Style | swing.manual or motor control |
| Color | bronze,copper,sliver,any color for your choice |
| Frame Finishing | powder coating or paint |
| Anti-rusting Way | hot dip galvanized or zinc spraing |
| Application | garden,home,school,factory,company etc |
Door iron grill design info
| Item | finished wrought iron glass interior door | |||||
| Material | Forge iron | |||||
| Style | Single door iron grill design | |||||
| Size | 3*8ft/customized | |||||
| Opening | Swing in/out | |||||
| Anti-rust treatment | All our door iron grill design undergo 7 steps of treatment: sand blast, hot zinc spray, epoxy primer(twice), acrylic acid black paint, hand applied faux finish, varnish coat | |||||
| Threshold | Intergrated threshold with door jamb to ensure the strongness of the iron door | |||||
| Weather stripping | Rubber weather stripping seals around jamb, door panel and glass panel | |||||
| Polyurethane foam | Jamb, panel, threshold and kickplate are fully injected with polyurethane foam | |||||
2. Material parameters (can be customized)
| Jamb & Door panel | 2*6" 12 guage tubing | |||||
| Scroll work | 5/8" solid steel | |||||
| Glass | 5/8" dual paned temper glass | |||||
| Lock holes | 2-3/8" backset, 2-1/8" diameter or according to your request | |||||
3. Manufacture procedure of door iron grill design
» CAD drawing for door iron grill design
» Prepare material
» Assemble door iron grill design
» Welding
» Polishing
» Sand blasting
» Hot Zinc Spray
» Epoxy slurry to fill minor imperfections
» Epoxy primer first time
» Epoxy primer second time
» Acrylic acid black paint
» Hand applied faux finish
» Varnish coat
| MOQ | We don't limit MOQ | |||||
| Sample: available | Lead time: about 30 days after order confirmed | |||||
| Cost: contact us to discuss | ||||||
| Packing detail | Door panel: shrink wrap, EPE, bubble wrap, corrugated paper, plywood case. “glass fragile” and “ this side up” on the crate for the convenience of discharge at your side. | |||||
| Door frame: packed with EPE, bubble wrap, currugated paper. | ||||||
| Shipping | FCL: the crate will be put in rows and the frame will be put above the crates. | |||||
| LCL: the crates and frame will be put into two iron stands for the safety of shipping and the convenience of discharge. | ||||||
| Lead time | 1-5 sets: about 25 days | |||||
| 1 20ft container: about 30days. | ||||||
| 2-3 containers: about 40 days. | ||||||
| Delivery clause | FOB Shanghai | |||||
| Terms of payment | Orders $5000 or under: full payment is expected when order is approved. | |||||
| Orders over $5000: 50% as deposit, balance against copy of B/L. | ||||||
| We accept T/T and L/C for the payment. | ||||||